Can’t figure out how to lift your child-safe cordless mini blinds? Modern 1” Cordless One Touch Mini Blinds can be raised or lowered with a gentle push or pull.
All you need to do is push your hand (or finger!) in the middle of the shade and push up on the bottom bar to raise the blinds to the desired height. To lower them, simply pull down on the bar.
If your new ‘minis’ come with an optional clear handle, just snap it onto the bottom rail.
Do your cordless mini shades have a wand? Just twist the wand (or rod), so that the slats are horizontal, and just lift up the blinds from the bottom. When you need privacy, just pull them straight back down.
Did you know? All cordless window covers have a lift mechanism either in the bottom rail or headrial.
If you are used to standard corded blinds and shades, figuring out how to operate cord-free window covers could seem confusing. But the fact is just the opposite! Operating cordless is very easy – just a touch of your finger can lift them!
Motorized cordless mini blinds can be controlled with a wireless remote or a smart device. And string-free panel track blinds can be easily slid left and right to adjust light exposure, insulation, and privacy.
Some cordless mini blinds work with a tension system that allows you to move your ‘minis’ up or down without pulling or touching cords. The tension mechanism provides enough force to hold the blinds in place.
Make sure to precisely measure the window frame and get a custom cut blind for smoother operation.
What are Cordless Mini Blinds?
Also referred to as aluminum blinds or ‘minis’, mini blinds are simple, clean, durable, and affordable window treatments. Their long narrow slats are 1 inch wide.
Cordless mini blinds are a safe and stylish option for most windows, measuring in width and height from 16 x 26” to 72 x 72”. They fully conform with the CPSC’s New Federal Safety Standards for Custom Window Coverings, so you can safely install them in homes with young children and pets.
Mini blinds are an ideal choice for small windows of your kitchen, media room, and living room. They are preferred as a heat- and moisture-resistant alternative to blackout roller blinds, Roman shades, woven wood shades, and room darkening sheer shades.
4 Easier Ways to Lift/Lower Cordless Mini Blinds
1. One Touch Cordless Operation
Advanced 1-touch operation allows you to easily raise your blinds with the touch of your finger. Similarly, they can be lowered or closed with minimal force.
2. Cordless Rail System
Lift the Rail to Raise the Blinds: To lift or open your mini blinds, simply lift the bottom rail upwards. Use smooth and easy motion to open the blinds completely or partially.
Tilt the Rail to Rotate Your Blinds: Tilt the bottom rail to adjust the angle of the mini 1” slat. You can also open or close them completely. Just pivot the rail back and forth to adjust the tilt of slats.
Pull Down on the Rail to Close the Blinds: Softly pull down on the roll with your thumb to completely or partially close the blinds. Only use gentle, natural pull. If you encounter resistance when lowering the blinds, they might be broken or incorrectly installed. Contact the installer or your local window treatment shop to get an inspection.
3. Twist Wand System
If you bought your mini blinds with a twist wand system, use the wand or rod left or right to adjust the angle of your slats. If you are unsure how a twist wand works, twist it both left and right to quickly learn its operation (through trial and error method).
4. Remote or Smart Device-Based Motorized Control
If your purchased battery-powered motorized mini-slat window coverings, they can be typically operated with a wireless remote or a smart device (e.g. your smartphone, table, or a smart home hub).
Wireless Remote: Use clearly labeled buttons or commands on a wireless remote to raise, or lower the fabric or control the direction of slats.
Push Button: When your remote isn’t nearby and you want to lift the shades, just hold don the push-button until the mini blinds are at the desired level, then release.
Smart Device:
If you choose to lift your cordless mini blinds with a smart device, download a manufacturer-specific app, link it to the blinds, and enjoy lifting or lowering the blinds with a tap on the touchscreen!
Program Your Minis for Automatic Operation: Smart mini blinds can be pre-programmed to open and close at certain times of the day, such as before bed, or in response to heat or lighting requirements in your room. Use this option for luxurious operation.
2 Quick Fixes for When Your Cordless Mini Blinds Won’t Go Up
If your cord-free 1-inch-slat shades aren’t going up properly or they’re uneven when you raise them, try the following:
Reset Tension Mechanism
Step 1: Place your hand on either side of your mini blind and pull it all the way down.
Step 2: Slowly lift the blind up, while gently rocking it from side to side.
Step 3: Again pull down on the bottom rail and push up to test if it’s opening and closing properly.
Note: To fully reset the tension mechanism, repeat this process a few times.
Reset Internal Motor
Some ‘minis’ come with an internal motor spring that retracts on lifting the blind. This control system may stop functioning, so you’ll need to reset it to restore its function.
Replace Damaged Parts
Extreme heat and humidity can cause the slats to expand and alter their shape, so they won’t go up properly. As a quick fix, you’ll need to replace the damaged part.
Note: Also look for and remove installation errors, if any.
FAQs
How do you raise cordless mini blinds?
Raising (and lowering) cordless mini blinds is the same process as cellular shades, as the tension mechanism is in the bottom rail for both. Gently push up in the middle of the rail (or rod) with your finger to open the blinds, and pull down on the rail to close them. A motorization system is a better alternative to go with.
How do you make cordless mini blinds go up?
Your cordless mini blinds will smoothly go up by:
- Lifting the bottom rail
- Using a wireless remote
- Pushing the button
- Tapping on your smart device
- Using voice commands
- Pre-programming to automate operation, etc.
How do you lift cordless roller blinds?
Cordless roll-up or roller blinds offer a precise, quiet, and cord-free operation just like mini blinds. One popular is to tug down the bottom rail, then up to lift and neatly stack the fabric into the roller mechanism in the headrail.
How do you raise and lower mini blinds?
Use mechanical or electronic lift systems to partially or completely raise and lower your inside or outside mounted mini blinds for the desired amount of light, ventilation, and privacy.
Need More Help?
Still unsure how to figure out the lift system of your mini blinds? Contact our customer care professionals for practical tips and solutions. Use 24/7 live chat or give us a ring at (800) 863-6109 now. Also, you can order a free sample with your desired lift mechanism.