Looking for ways to get creases out of window blinds? Here’re easy DIY tips to get wrinkles and creases out of your window blinds and get them in tip top shape. Taking care of your window treatments will retain their appearance and you’ll enjoy their aesthetic and functionality longer.
It’s not uncommon for window blinds to get creased and wrinkled. High humidity, being exposed to open air, and being raised for a long time makes window blinds susceptible to creases, wrinkles, and folds. Removing those pesky creases will make your shades, curtains, or blinds looking like new.
Scroll on to learn more how to take creases out of window blinds, such as blackout blinds, cellular blinds, roller blinds, and Roman blinds.
4 Easy, Practical Tips to Get Creases out of Window Blinds
1. Natural, Cost-Effective Option: Lower Your Blinds & Leave Them Down
To naturally get wrinkles and creases out of your window blinds, just lower them and keep them lowered for an extended period of time. Keeping the window coverings lowered will help the fabric extend, something the fabric cannot do if it’s constantly being raised and lowered.
2. Steam Your Window Blinds
Handheld steamer is an easy, affordable way to get creases out of roller blinds, Roman shades, cellular blinds, and blackout blinds. To get rid of all the folds and wrinkles, make sure to steam the entire fabric/material.
3. Iron the Blinds
- Take the creased slats of the blinds down.
- Spread it on the iron board.
- Take an iron and make sure the steam is off.
- If you are worried about burning the fabric, grab some baking paper and put it over the slat to be ironed.
- Move the iron around on the creased part of the slat.
- Once the creases are removed, just let the fabric sit there for a while and then reinstall it.
4. Use Wrinkle Sprays or Other Chemicals
Crease removing products such as wrinkle sprays or other chemicals can aid in getting folds out of your window blinds. However, before applying such products, make sure they won’t damage your shade’s fabric or motorization mechanism. If necessary, apply the wrinkle removal product or chemical to see if it discolors or damages the blind.
5 DIY Methods to Fix Creased, Bent Vertical Blinds
If you have toddlers and rambunctious pets in your home, bents slats of vertical blinds are almost inevitable. Bent or creased slats can often be straightened using household items. For example, a pair of pliers and gentle heat from a hair dryer can do the trick. However, you always need to exercise caution to prevent further damage.
- Use a hairdryer to warm the bent slats, while bending them back into their original shape with your hands.
- Gently apply heat from a heat gun while shaping the bent slats back into place.
- Place the bent, creased, or wrinkled slats on a flat surface and press a steam iron over the fabric. This will soften the slats, making them easier to be reshaped with your hands.
- Place a straightedge next to the bent slats and press the slats against the straightedge to straighten them.
- Hang the bent slats vertically and place the weight at their bottom. Leave them overnight to let gravity straighten out the slats.
These DIY tips will help restore your creased blinds’ look and functionality.
Can You Iron a Blind? Yes! Here’re 5 DIY Steps
If you have a blind that is creased or a little scruffy, you can easily iron it on low heat (not more than 110ºC) to get the creases and restore their appearance. However, you need to be cautious when doing so, as the heat from the iron can damage the blind’s fabric.
If you have blackout slats, only iron them on the woven side. A good trick to ensure maximum protection of the fabric is to place a dry tea towel or baking paper between the iron and the slats.
Here are some steps you can follow when ironing your window treatments:
Step 1: Set your iron to a low heat level and make sure it is free of any dirt or residue.
Step 2: Before you start ironing, place a clean, damp cloth over the blinds. This will help to prevent the iron from directly contacting the blinds and damaging them.
Step 3: Slowly run the iron over your window blinds. Apply gentle pressure as you go. Be sure to move the iron in a back-and-forth motion so that the heat is evenly distributed.
Step 4: If your blinds are wrinkled or difficult to smoothen, you may need to use a steamer to remove those wrinkles. However, hold the steamer a few inches away from the blinds and allow the steam to penetrate the fabric.
Step 5: Once you have finished ironing the window blinds, allow them to cool. Then hang them back on the window frame.
Note: It is important to note that some types of blinds, such as those made from synthetic materials, may not be suitable for ironing. In these cases, it is a good idea to use a steamer or to seek the services of an expert.
FAQs
How to straighten out window blinds?
Use a hairdryer or low-heat steam from an iron to straighten out window blinds. Alternatively, you can use the heat gun method, boiling water method, or straightedge method to restore the shape of window blinds.
Do creases fall out of blinds?
Yes, creases will naturally fall out of blinds as they are operated regularly.
Can you get creases out of blinds?
Yes, and it’s simple, quick! Use a handheld steamer to steam the wrinkles out. Handheld steamers are designed to help quickly remove creases and wrinkles from roller blinds, honeycomb blinds, Roman blinds, vertical blinds, and more.
How to straighten crumpled blinds?
To straighten the crumpled blinds, just give them a little pinch.
How to get creases out of blackout blinds DIY?
A few common DIY approaches to get creases out of blackout blinds are:
- Apply a wrinkle-release spray to your blackout blinds.
- Stream iron the fabric.
- Use a clothes steamer.
Need More Help?
Still unsure how to get the creases out of your window blinds? Get in touch for free consultation! Use 24/7 live chat or give us a call at (800) 863-6109 to contact our experts for DIY steps to remove creases, wrinkles, and folds from window blinds.