Installing cellular shades isn’t as tough and time-consuming as it’s claimed or presumed. You can do it on your own with a few tools and some quick DIY installation tips.

Let’s make things easier, simpler, and professionally more perfect with a step-by-step DIY installation guide on “how to install cellular shades”.

Before You Start Installing Cellular Shades

  • Take accurate measurements of your window size with a steel measuring tape.
  • While taking measurements, account for inside mounts and outside mounts.
  • Double check number of screws, mounts, and other hardware equipment.

Tools You’ll Need

  • Screwdriver
  • Drill (hand or electric)
  • Level tool
  • A steel measuring tape and pencil
  • Step ladder (if needed)

Choose Outside or Inside Mount Cellular Shades

Decide if you want to install your cellular shades inside the window frame or casing (Inside Mount) or above and around the window recess (Outside Mount).

Step-by-Step Guide for Inside Mount Cellular Shades

Step 1: Sort Out and Prepare Mounting Brackets

Sort out different types of mounting brackets, like end box and center support brackets, and prepare them before you begin fixing them to the inside of the window recess or casing for inside mount cellular shades.

Step 2: Align Brackets with a Level Tool and Mark Their Positions

  • Use a level tool to align box brackets at each end of the headrail or opposite corner of the window frame.
  • Mark the position of each bracket with the help of a pencil.
  • Mark the location of center support bracket in the center of box brackets.
  • If there are more than one support brackets, place them evenly between the end brackets.

Step 3: Mark Screw Locations and Drill Pilot Holes

  • Mark the location of bracket mounting holes with the help of a pencil.
  • Drill pilot holes using a hand or electric drill.
  • Use drywall anchors if you are mounting cellular shades into a drywall without studs.

Step 4: Screw Brackets in Place

  • Use a screwdriver to screw different types of brackets (e.g., end box brackets and center support brackets) into place.
  • Attach the brackets using the top, side, or back holes depending on the location of installation.

Step 5: Slide or Snap Headrails into the Brackets

  • Install your inside mount cellular shades by sliding or snapping the headrail into the brackets.
  • Secure the headrail in place by closing the end box brackets.

Step 6: Test Operation of Inside Mount Cellular Shades

  • Raise, lower, rotate, or adjust your cellular shades to test if each part is working perfectly.
  • Pull down the cord to unlock it and slowly release it to let you window treatments get lowered to the desired level.
  • Pull the cord down to raise your inside mount cellular shades.
  • Lock the cord once your cellular shades are adjusted at the required position.

Step 7: Installing Valance

To conceal the installation hardware and to add to the decorative appeal of your window cellular shades, you may like to install a valance.

  • Fix two valance clips, each at the opposite end of the headrail.
  • Attach remaining clips evenly to the front of the headrail.
  • Make sure that two parts of a valance clip snap together.

Step-by-Step Guide for Outside Mount Cellular Shades

Step 1: Sort Out and Prepare Mounting Brackets

Sort out different types of mounting brackets, like end box and center support brackets, and prepare them before you begin fixing them to the outside of the window recess or casing for outside mount cellular shades.

Step 2: Align Brackets with a Level Tool and Mark Their Positions

  • Use a level tool to align box brackets at each end of the headrail or opposite corner above the window frame or casing.
  • Mark the position of each bracket with the help of a pencil.
  • Mark the location of center support bracket in the center of box brackets.
  • If there are more than one support brackets, place them evenly between the end brackets.

Step 3: Mark Screw Locations and Drill Pilot Holes

  • Mark the location of bracket mounting holes with the help of a pencil.
  • Drill pilot holes using a hand or electric drill.
  • Use drywall anchors if you are mounting cellular shades into a drywall without studs.

Step 4: Screw Brackets in Place

  • Use a screwdriver to screw different types of brackets (e.g., end box brackets and center support brackets) into place.
  • Attach the brackets using the top, side, or back holes depending on the location of installation.

Step 5: Slide or Snap Headrails into the Brackets

  • Install your outside mount cellular shades by sliding or snapping the headrail into the brackets.
  • Secure the headrail in place by closing the end box brackets.

Step 6: Test Operation of Your Outside Mount Cellular Shades

  • Raise, lower, rotate, or adjust your cellular shades to test if each part is working perfectly.
  • Pull down the cord to unlock it and slowly release it to let your window treatment get lowered to the desired level.
  • Pull the cord down to raise your outside mount cellular shades.
  • Lock the cord once your cellular shades are adjusted at the required position.

Step 7: Installing Valance

To conceal the installation hardware and to add to the decorative appeal of your outside mount cellular shades, you may like to install valance.

  • Fix two valance clips, each at the opposite end of the headrail.
  • Attach remaining clips evenly to the front of the headrail.
  • Make sure that two parts of a valance clip snap together.

Contact 24/7 Live Chat for Further Help

If you face any difficulty in measuring for or installing your inside mount or outside mount cellular shades or other window treatments, you can use the 24/7 live chat option to get further help.